4-1
Combi
Flash
®
R
f
Installation Guide
Section 4 Remote Interfaces
This section provides instructions for controlling the
Combi
Flash
R
f
system through a remote interface. The system
can be accessed by several personal computers through a
corporate network, or by a single personal computer (PC)
through a direct connection.
4.1 Network Configuration
Note
The procedures described in this section will require assistance
from your network administrator. Contact your Information
Technology department before proceeding.
The system has a factory-assigned IP address—192.168.1.51.
In many cases, this address must be reconfigured for use on a
corporate network. To reconfigure the IP address:
1. From the touch screen panel, select the
Tools>Configuration menu command.
2. The Configuration window has two tabs. Select the
Network Configuration tab.
3. Select the Network Type. The options are “Static IP” and
“DHCP”.
Static IP
– If you select “Static IP,” configure the IP
Address, Netmask, and Gateway with the information pro-
vided by your network administrator.
DHCP
– Before considering DHCP, review the three follow-
ing questions with your network administrator. If you can
answer
Yes
to all questions, then DHCP is an option for
your system.