TELEDYNE OLDHAM SIMTRONICS Everywhereyoulook MultiFlame DF-TV7, Руководство по эксплуатации

Страница: 29 / 64

MULTIFLAME DF-TV7
OPTICAL FLAME DETECTOR
OPERATING MANUAL
NOSP17662
Revision 03
23
Relay card, terminal block (option):
Point JP2 Description
1 C1 Relay1 common
2 R1 Relay 1 de-energized
3 T1 Relay 1 energized
4 T1 Relay 1 energized
5 C2 Relay 2 common
6 C2 Relay 2 common
7 R2 Relay 2 de-energized
8 T2 Relay 2 energized
9 T2 Relay 2 energized
10 C3 Relay 3 common
11 R3 Relay 3 de-energized
12 T3 Relay 3 energized
4.3.5 EOL Resistor
This applies to ATEX/IEC installations only. The EOL resistor must only be used
inside the housing on the terminal block.
This configuration allows the detector to be connected to PLC.
Because this type of device cannot operate the detector’s 4-20 mA signal, the relays are used to
interface with the detection loop.
Connecteur alimentation / signal
Connecteur relais : 2 connecteurs avec détrompeur