TELEDYNE OLDHAM SIMTRONICS Everywhereyoulook MultiFlame DF-TV7, Руководство по эксплуатации

Страница: 43 / 64

MULTIFLAME DF-TV7
OPTICAL FLAME DETECTOR
OPERATING MANUAL
NOSP17662
Revision 03
37
6.7 Information menu [INFO]
The information menu contains all information concerning the identity and settings of the detector.
The first screen gives the detector’s reference and its serial number.
6.7.1 [IDEN]tity submenu
Presentation of:
•
detector operation mode (UV/2IR, UV, IR(2IR or 3IR))
•
Sensor sensitivity (50, 75, 100%)
•
Alarm time delay (seconds)
Sub-menus present the board software version and the power supply voltage.
6.7.2 [OUT]put submenu
Presentation of:
•
Curent protocol (0-22 mA or 4-20 mA)
•
Normal state of the relays (normally open or normally closed)
•
Conditions of relays activation
Relays can be set with a level 2 access.
6.7.3 [STAT]e Information sub-menu
Presentation of:
•
Alarms history
•
Alarm activation
•
Faults list (use F1 key to scroll faults)
•
Alarm count since last reset
•
Failed optical self-test count since last reset
6.7.3.1 [ALRM] Alarm screen
Allows Alarms history display.
6.7.3.2 [FLT.] Fault screen
Displays a list of eventual faults (press F1 key to scroll through the list)
6.7.3.3 Network Screen Switch
This menu and its sub-menus are used for the network detector settings. For any further details,
please refer to the Syntel system operating manuals.