TELEDYNE OLDHAM SIMTRONICS Everywhereyoulook MultiFlame DF-TV7, Руководство по эксплуатации

Страница: 35 / 64

MULTIFLAME DF-TV7
OPTICAL FLAME DETECTOR
OPERATING MANUAL
NOSP17662
Revision 03
29
5 Commissioning
5.1 Visual inspection
Make certain that all the operations of the “Installation” chapter have been achieved correctly.
Pay particular attention on installation conformity, check the cables entry, the presence of O-
rings, and the connexion of the cartridge.
•
Check if the detection mode (UV/IR, 3IR) match with the marking
5.2 Power-up
The sensor is powered and operating when the green LED on the communication head is blinking.
•
Check the connection to the control unit
5.3 Operational tests
All MultiFlame detectors are delivered set and tested. Some additional tests are necessary to
check the good working of the loop. Please make sure to have all authorizations needed before
running the following operations:
•
Check the states/information using the wireless configuration tool (TLU)
•
Check alarms delay setting: (factory settings)
-
5 seconds for XT versions
-
2 seconds for XV versions
•
Eventually, adjut the value up to 20 sec
The alarm state needs the fire detection to be continuously detected over the full
temporisation delay to be activated