TELEDYNE OLDHAM SIMTRONICS Everywhereyoulook MultiFlame DF-TV7, Руководство по эксплуатации

Страница: 48 / 64

MULTIFLAME DF-TV7
OPTICAL FLAME DETECTOR
OPERATING MANUAL
42 NOSP17662
Revision 03
6.9.1.1 Flame simulation
This menu initiates an optical test using the integrated test lamps.
Test results are indicated by the detector LEDs and on the TLU (message). However, there is no
action on the outputs (Relays and 4-20mA interface).
6.9.1.2 LT15 test menu
This menu enables manually tests on detection, using either a test fire or a test lamp (Type LT 15
TELEDYNE OLDHAM SIMTRONICS).
In this mode, “false alarms rejection” algorithms are by-passed, to make a simulated alarm easier
to achieve.
All local visual indicators are activated (front cartridge LEDs, communication head red LED, TLU
display). While entering into the menu, the detector will ask for outputs (current loop and relay)
activation.
6.9.1.3 Output test menu
This menu allows the user to force the detector output state for loop testing:
•
Individual test of the UV and IR LEDs.
•
Individual activation of each relay.
•
Setting analogue 4-20mA output. Available values are: 0 mA, 2 mA, 3.4 mA, 4 mA, 8
mA, 12 mA, 16 mA and 20 mA by pressing on ++ or -- pad.
6.9.2 Network
This menu is related to the Network variant of the detector (Syntel system).
6.10 Magnets Operation
The magnetic wand must be applied on PG1 or PG2 marks for a certain period of time depending
on the operation you want to proceed with.
PG1 or 2 (3s)
Alarm Reset+
CEDPC Led
PG1 (10s)
LT15 Test
PG1 or 2 (>10s)
Early exit
PG2 (10s)
Flame simulation