Teledyne Lecroy LabMaster 10 Zi-A Скачать руководство пользователя страница 43

Страница: 43 / 48

LabMaster 10 Zi-A Getting Started Guide

MAINTENANCE

Firmware Updates

Free firmware updates are available periodically from the Teledyne LeCroy

website at

teledynelecroy.com/support/softwaredownload.

Registered

users will receive email notification when a new update is released.

CAUTION.

Do not install any XStreamDSO version prior to 8.6.1.0 on

Windows 10 oscilloscopes. Doing so will disrupt the normal behavior

of the software, unless you run the recovery procedure.

To download and install the update:
1. From the oscilloscope desktop (File > Exit) or a remote PC, launch the

browser and visit the software download page at the URL above.

2. Click the link to

Oscilloscope Downloads > Firmware Upgrades

3. Enter the required model information and account login. If you don’t

yet have an account, create one now.

4. Follow the instructions to save the installer to a location on the

oscilloscope D: drive or a USB storage device.

5. On the oscilloscope, use Windows Explorer to browse to the installer

file and double-click it to launch the XStream Setup wizard.

6. If prompted, enter the password

SCOPEADMIN

, all uppercase.

7. Follow the wizard prompts.
8. When installation is complete, power cycle the instrument.

CAUTION.

The installation may take several minutes, depending on

the length of time since your last update. Do not power down the

oscilloscope at any point during the installation process.

Switching Windows Users

Windows 10 oscilloscopes are by default set to operate from the LeCroyUser

account, but you must run the oscilloscope from the Administrative User,

LCRYADMIN, in order to change Windows settings, run certain compliance

packages or use LXI remote control.

Note:

To install software or change Windows settings, it is sufficient to

supply the administrative user password, SCOPEADMIN.
To switch to the LCRYADMIN account:
1. Exit the XStreamDSO application by choosing

File > Exit

2. Open the Windows

Start menu

3. Hover over the

Teledyne LeCroy logo

and select user

LCRYADMIN

4. Enter the administrative password

SCOPEADMIN

(all uppercase).

5. Double-click the

StartDSO icon

on the oscilloscope desktop.

To return to the default user, repeat this procedure selecting

LeCroyUser

and

entering the password

lecroyservice

(all lowercase).

You may create as many new users on the oscilloscope as you wish provided

you are logged in as LCRYADMIN when doing so. Use the standard Windows

tools to add users.

Note:

As long as there are any Standard (non-administrative) users, the

oscilloscope will reboot into the last active Standard user, regardless of

whether you've switched to an administrative user. The only way to change

this is to give LeCroyUser and all other users Administrator privileges.

Содержание LabMaster 10 Zi-A
















































Результаты поиска

Содержание LabMaster 10 Zi-A

Отзывы:

Похожие инструкции для LabMaster 10 Zi-A

Бренды по названию

Популярные бренды

Teledyne Lecroy LabMaster 10 Zi-A, Руководство по началу работы

Результаты поиска

Содержание LabMaster 10 Zi-A

Отзывы:

Похожие инструкции для LabMaster 10 Zi-A

Бренды по названию

Популярные бренды