LabMaster 10 Zi-A Getting Started Guide
35
BASICS
Measurements are waveform parameters that can be expressed as numerical values, such as amplitude or frequency. You can measure up-to-twelve
parameters on one or more traces and view the active readout in a table below the grid. Statistics can be added to the readout, along with histicons, a
miniature histogram of the statistical distribution. You can also gate measurements to limit them to a specific portion of the trace, or plot a histogram,
trend or track of the measurement over time.
Measure >
Measure Setup
opens the
Measure dialog.
Touch
Measure
column
to re-open Measure
dialog if closed.
P
n
dialogs
to
configure user-defined
measurement set.
Measurements and Statistics
Measure dialog
to add/remove
Satistics
&
Histicons
,
turn on
Standard
Measurements
, or
Clear Sweeps
.
Action buttons quickly
plot
Histogram
,
Trend
or
Track
of measurement.
Turn on
Help Markers
to show what is being
measured on waveform.
Touch
P
n
cell
to re-open
P
n
dialog.
Enter
Gates
(in div) to constrain
span of measurement, or just drag
gate markers from edge of grid.
Accept
measurements
based on range of
values or state of
second, qualifying
waveform.
