Teledyne Lecroy Frontline 802.11 Скачать руководство пользователя страница 146

Страница: 146 / 223

Figure 4.88 - Data/Audio Extraction Settings dialog

2. Choose a checkbox(es) on the left side of the dialog to identify from which profile(s) you want to extract

data.

It's important to note that if there is no data for the profile(s) you select, no extracted file is created.

3. If you want the file(s) to open automatically after they are extracted, select the

Open File(s) After

Extraction

checkbox.

Note:

This does not work for SCO/eSCO.

4. Click on a radio button to write the streams as

Two Mono Files

or as

One Stereo File

Note:

This option is for SCO/eSCO only.

5. Select the checkbox if you want to convert

A-Law and µ-law to Linear PCM.

CVSD are always converted to Linear PCM. It's probably a good idea to convert to Linear PCM since more

media players accept this format.

Note:

This option is for SCO/eSCO only.

6. Select the

Add Silence packets

to insert the silence packets (dummy packets) for the reserved empty

slots into the extracted file. If this option is not selected, the audio packets are extracted without inserting
the silence packets for the reserved empty slots.

Note:

This option is for SCO/eSCO only.

TELEDYNE LECROY

Chapter 4 Capturing and Analyzing Data

140

Frontline 802.11 Hardware & Software User Manual

Содержание Frontline 802.11
































































































































































































































Результаты поиска

Содержание Frontline 802.11

Отзывы:

Похожие инструкции для Frontline 802.11

Бренды по названию

Популярные бренды

Teledyne Lecroy Frontline 802.11, Руководство по аппаратному и программному обеспечению

Результаты поиска

Содержание Frontline 802.11

Отзывы:

Похожие инструкции для Frontline 802.11

Бренды по названию

Популярные бренды