Teledyne Lecroy Frontline 802.11 Скачать руководство пользователя страница 173

Страница: 173 / 223

Modify

1. Select the frame or event with the bookmark to be edited.

2. There are three ways to access the

Add/Modfy Bookmark

dialog.

a. Select

Add or Modify Bookmark

from the

Bookmarks

menu on the

Frame Display

and

Event Display

b. Select the

Add or Modify Bookmark

icon on one of the toolbars, or

c. Right-click on the frame/event and choosing

Modify Bookmark…

on the selection.

3. Change the comment in the dialog box

4. Click

. The edited bookmark will be saved as a part of the .

cfa file.

5. You can also select

Display All Bookmarks

from the

Frame Display

and

Event Display

toolbar

or the

Bookmarks

menu. the

Find

window will open on the

Bookmark

tab. Select the bookmark you

want to modify and click the

Modify…

button. Change the comment in the dialog box, and click

Delete

1. Select the frame or event with the bookmark to be deleted.

2. There are three ways to access the

Add/Modfy Bookmark

dialog.

a. Select

Add or Modify Bookmark

from the

Bookmarks

menu on the

Frame Display

and

Event Display

b. Select the

Add or Modify Bookmark

icon on one of the toolbars, or

c. Right-click on the frame/event and choosing

Modify Bookmark…

on the selection.

3. Click on the

Delete

button. The bookmark will be deleted.

4. You can also select

Display All Bookmarks

from the

Frame Display

and

Event Display

toolbar

or the

Bookmarks

menu. the

Find

window will open on the

Bookmark

tab. Select the bookmark you

want to delete and click the

Delete

button.

5.2.2 Displaying All and Moving Between Bookmarks

There are three ways to move between bookmarks.

1. Press the F2 key to move to the next frame or event with a bookmark.

2. Select Go to Next Bookmark from the Bookmarks menu.

3. Click the Display All Bookmarks icon

. Select the bookmark you want to move to and click the Go To

button, or simply double-click on the bookmark. Click the Move Forward and Move Back buttons to cycle
through the bookmarks.

Chapter 5 Navigating and Searching the Data

TELEDYNE LECROY

Frontline 802.11 Hardware & Software User Manual

167

Содержание Frontline 802.11
































































































































































































































Результаты поиска

Содержание Frontline 802.11

Отзывы:

Похожие инструкции для Frontline 802.11

Бренды по названию

Популярные бренды

Teledyne Lecroy Frontline 802.11, Руководство по аппаратному и программному обеспечению

Результаты поиска

Содержание Frontline 802.11

Отзывы:

Похожие инструкции для Frontline 802.11

Бренды по названию

Популярные бренды