Teledata s.r.l. ONEMINI, Руководство пользователя и инструкция по установке

Страница: 26 / 88

ONEMINI
F
IRE
A
LARM
C
ONTROL
P
ANEL
U
SER AND
I
NSTALLATION
M
ANUAL
- R
EV
. 1.0.3 / 2018
P
AGE
24
7.5 System description
Below is described a description of the control panel logic and of connections required to set-
up the system.
7.5.1 Relations between the elements of the plant
The following picture shows the relations between the various elements that make up the
plant managed by the control panel.
Devices (detectors, call points, etc.) are grouped in zones linked between them by specific
logical functions that can activate one or more outputs.
7.5.2 Sounder and load connection
The outputs 5, 6,7,8 of the connector J12 are used to connect the loads (sounders, bells,
optical acoustic displays) for which it is necessary to monitor the cut and the short.
The control panel is able to detect the presence of a cut or of a short circuit on the connection
line of the loads. In the event of one of these cases the control panel will indicate it by an
optical indication (message on the display, yellow LED for sounder fault is on) or acoustic
signal (buzzer).
Z1
Z2 Zn
Logic function: Z1 | Z2 ...
O1 O2 On