© Telect, Inc., All Rights Reserved, 12.7.16 v.4
1.509.926.6000 :: telect.com
45
User Manual
Advanced Distribution Frame (ADF) Systems
4.
As an aid in cabling the first tray, open several or all trays above the first tray. To open trays, pull slightly on
the tray latches and then rotate the trays toward the inboard area of the ADF.
5.
Secure the connector of the first 900-µm strand to the adapter.
NOTE:
Telect recommends that when installing more than one 900-µm strand in a tray, start with the adapter
closet to the tray’s inboard raceway.
Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52
www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 119736-4
Page 5-45
4. As an aid in cabling the first tray, open several or all trays above the first tray. To open trays,
pull slightly on the tray latches and then rotate the trays toward the inboard area of the ADF.
5. Secure the connector of the first 900-µm strand to the adapter.
NOTE:
Telect recommends that when installing more than one 900-µm strand in a tray, start with
the adapter closest to the tray’s inboard raceway.
Figure 40 - Securing Connector to Adapter
6. Fit the first strand through the tray’s access cover and route into the breakout area.
Outboard Cabling
Access Cover
Figure 41 - Routing Cable to Breakout Area
Figure 40 - Securing Connector to Adapter
6.
Fit the first strand through the tray’s access cover and route into the breakout area.
Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52
www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 119736-4
Page 5-45
4. As an aid in cabling the first tray, open several or all trays above the first tray. To open trays,
pull slightly on the tray latches and then rotate the trays toward the inboard area of the ADF.
5. Secure the connector of the first 900-µm strand to the adapter.
NOTE:
Telect recommends that when installing more than one 900-µm strand in a tray, start with
the adapter closest to the tray’s inboard raceway.
Figure 40 - Securing Connector to Adapter
6. Fit the first strand through the tray’s access cover and route into the breakout area.
Outboard Cabling
Access Cover
Figure 41 - Routing Cable to Breakout Area
Figure 41 - Routing Cable to Breakout Area
