manualshive.com logo in svg

Telect ADF, Руководство пользователя

Поделиться
Скачать
Telect ADF Скачать руководство пользователя страница 29

© Telect, Inc.,  All Rights Reserved, 12.7.16 v.4

1.509.926.6000  ::  telect.com

23

User Manual

Advanced Distribution Frame (ADF) Systems

2.5 Interconnect - NEs to NEs

Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52

 

www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 119736-4

Page 2-23

2.5 Interconnect - NEs to NEs

Network Element Patch Cords  A

Network Element

Patch Cord  B

WaveTrax™ Cable

Management System

Main ADF

InterBay Storage Panel (ISP)

Network Element Modules

Figure 21 - Interconnect - NEs to NEs

Fundamentals of this cross-connect are as follows:
• NE (Network Element) modules (only) are mounted on both sides of the Main ADF bay.
• ISPs (Interbay Storage Panels) are required.
• Back-side NE patch cords come in from the CMS (Cable Management System) into the ISP 

and are presented to the back side of the NE modules (Network Element Patch Cords A).

• Front-side NE patch cords are routed into the frame from the CMS and presented to the front 

side of the adapter (Network Element Patch Cord B).

Figure 21 - Interconnect - NEs to NEs

Fundamentals of this cross-connect are as follows: 

•  NE (Network Element) modules (only) are mounted on both sides of the Main ADF bay

•  ISPs (Interbay Storage Panels) are required

•  Back-side NE patch cords come in from the CMS (Cable Management System) into the ISP and are  

presented to the back side of the NE modules (Network Element Patch Cords A)

•  Front-side NE patch cords are routed into the frame from the CMS and presented to the front side of the 

adapter (Network Element Patch Cord B)

Содержание ADF




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды