manualshive.com logo in svg

Telect ADF, Руководство пользователя

Поделиться
Скачать
Telect ADF Скачать руководство пользователя страница 30

© Telect, Inc.,  All Rights Reserved, 12.7.16 v.4

1.509.926.6000  ::  telect.com

24

User Manual

Advanced Distribution Frame (ADF) Systems

2.6 Interframe Cross-Connecting

Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52

 

www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 119736-4

Page 2-24

2.6 Interframe Cross-Connecting

IntraFacility Cables (IFC)

Upper Trough  B

IFC Modules

Lower Trough  A

WaveTrax™ Cable

Management System

InterBay Storage

Panel (ISP)

Main ADF

Network Element Module

Figure 22 - Interframe Cross-Connecting

• Interframe connections can be done in two ways:

1. by routing the patch cord between the two frames via the Lower Trough (A)
2. by routing the patch cord through the Upper Trough (B)

• The excess cross-connect patch cord length is stored in the Main ADF bays.
• For NE (Network Element) patch cord isolation and safety, storing cross-connect patch cords 

in the ISP (InterBay Storage Panel) is 

not

 recommended.

• Connect the origin, then route to the cross-connecting point. Store any extra cable on the 

Main ADF bay nearest the second connection.

Figure 22 - Interframe Cross-Connecting

•  Interframe connections can be done in two ways: 

1.  By routing the patch cord between the two frames via the Lower Trough (A)
2.  By routing the patch cord through the Upper Trough (B)

•  The excess cross-connect patch cord length is stored in the Main ADF bays
•  For NE (Network Element) patch cord isolation and safety, storing cross-connect patch cords in the ISP 

(Interbay Storage Panel) is 

not

 recommended

•  Connect the origin, then route to the cross-connecting point and store any extra cable on the Main ADF bay 

nearest the second connection

Содержание ADF




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды