Telect ADF Скачать руководство пользователя страница 15

Страница: 15 / 67

1.509.926.6000 :: telect.com

User Manual

Advanced Distribution Frame (ADF) Systems

1.2.2 ADF ICs (after Trough Removed)

ADF Interconnect (IC) bays are physically similar to but functionally quite different from the ADF XI bays.

To convert XI to IC, remove the top trough. With the top trough removed, the overhead access to the patch

area of a Main and ISP ADF ICs are confined to a center drop from an overhead cable management system.

Both Main and ISP ADF ICs feature an interconnected bottom trough for routing cable between the ADF

IC bays.

ADF XI and IC bays can be used in the same lineup; cross-aisle connections between lineups are common

applications for ADF ICs.

The following figures show a few typical interconnection schemes between IFC and network element (NE)

cabling. In these examples, IFC routing to the rear of the IFC ADF modules is from the facilities ladder rack

with NE cabling dropped from an overhead cable management system (CMS).

Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52

Page 1-9

1.2.2 ADF ICs (after Trough Removed)

ADF Interconnect (IC) bays are physically similar to but functionally quite different from the ADF

XI bays.
To convert XI to IC, remove the top trough. With the top trough removed, the overhead access to

the patch area of a Main and ISP ADF ICs is confined to a center drop from an overhead cable

management system. Both Main and ISP ADF ICs feature an interconnected bottom trough for

routing cable between the ADF IC bays.
ADF XI and IC bays can be used in the same lineup; cross-aisle connections between lineups

are common applications for ADF ICs.
The following figures show a few typical interconnection schemes between IFC and network

element (NE) cabling. In these examples, IFC routing to the rear of the IFC ADF modules is from

the facilities ladder rack with NE cabling dropped from an overhead cable management system

(CMS).

(Optional)

Ladder Rack

IFC Cabling to Rear

(Outboard Side) of

of IFC Module

CMS

Preferred Pigtail Route from

Inboard Side of IFC Module Via

CMS to Network Element

Alternate Route

Figure 9 - IFC to NE Interconnection Using ADF ICs in an ADF Lineup

Содержание ADF

































































Результаты поиска

Содержание ADF

Отзывы:

Бренды по названию

Популярные бренды

Telect ADF, Руководство пользователя

Результаты поиска

Содержание ADF

Отзывы:

Бренды по названию

Популярные бренды