TCM260904
Rev
0.1
TCM260904
Page 24 of 31
S
ETTING
O
F
C
HANNELS
Item Title
Options
Description
A Channel
1 ~ 256
“Channel setting”:
This remote controller provides three
frequency ranges A, B and C, that can be changed by
transmitter’s pushbuttons directly. Each frequency range
has 256 channels. The operating channel in each range
will be changed simultaneously if a new channel number
is set by DIP switch or software. For example: If the
original channel number is 1, then the operating channels
are A
1
, B
1
and C
1
. If the channel number is changed from
1 to 24 then the operating channels will be A
24
, B
24
and
C
24
.The operating frequency of A
24
is equal to “A
1
+
channel spacing
×
(24 – 1)”.
P
ASSWORD CODE SETTING
Item Title
Options
Description
A Password
code
0 ~ 9
This item is available when the “Password set” function is
set as “By software”.
“Password code”
Sets the password code. The code
length is four-digits. These numbers 0~9 are used to
indicate the corresponding pushbutton.
F
UNCTION SETTING BY RADIO
:
(1)
Use a PC or maintenance kit to program the function settings into the transmitter in advance.
(2)
Depress EMS mushroom and turn rotary key switch to the “off” position.
(3)
Depress and hold both “Up” & “East” pushbuttons and turn key from “off” to “on” position simultaneously.
(4)
Release “Up” & “East” pushbuttons. At this time, the LED indicator will flash with yellow and red colour
alternately.
(5)
After the receiver alarm sounds two short beeps and one long beep “
•
•
–” (two short beeps and one long
beep means that function setting is completed), turn key from “on” to “off” position.
(6)
“Power-On” according to the proper procedure and return to normal operation.
