Telecast CopperHead 3400, Руководство пользователя

Страница: 75 / 102

Telecast Fiber Systems – CopperHead 3400 Transceiver System User Guide – Preliminary Version
Page 73
A
Belden
Brand
Display Mode Readout Base Station Digital Display Activity Explanation
DIAGNOSTIC MODE Microcontroller Board Revision Version (REV)
DIAG/REV
A quick push of the Display Mode Selector advances to the Power (POWR)
diagnostic sub-mode. This sub-mode displays the microcontroller firmware
revision of every board in the Base Station that has a microcontroller.
(Note: the REV versions noted here were current as of August 1, 2010. Your
system may have different REV versions)
DIAG/REV REV Initial display of REV after Display Mode Selector being advances
DIAG/REV DISP Indicates the Display microcontroller board is revision is being queried
DIAG/REV REV Indicates that sub-mode is REV
DIAG/REV REVC Indicates that the REV for the DISP board is REVC
DIAG/REV VBS Indicates the VBS microcontroller board is revision is being queried
DIAG/REV REV Indicates that sub-mode is REV
DIAG/REV REVA Indicates that the REV for the VBS board is REVA
DIAG/REV BASE
Indicates the Base Station main microcontroller board is revision is being
queried
DIAG/REV REV Indicates that sub-mode is REV
DIAG/REV REVA Indicates that the REV for the BASE board is REVA
DIAG/REV AUD Indicates the audio microcontroller board is revision is being queried
DIAG/REV REV Indicates that sub-mode is REV
DIAG/REV REVA Indicates that the REV for the AUD board is REVA
DIAG/REV PS
Indicates the power supply microcontroller board is revision is being
queried
DIAG/REV REV Indicates that sub-mode is REV
DIAG/REV REVD Indicates that the REV for the DISP board is REVD
This display cycle repeats until the Display Mode Selector is pushed
DIAGNOSTIC MODE Camera Unit Error Status (CAM)
A quick push of the Display Mode Selector advances to the Camera Unit
(CAM) diagnostic sub-mode. This mode displays the error status of the
Camera Unit. The Digital Display Characters are green if Camera Unit shows
no error and red if the Camera Unit does have an error. This is a high-level
view of the Camera Unit error status. For further information go to the
Camera Unit diagnostic display.
DIAG/CAM CAM Indicates that the sub-mode is CAM
DIAG/CAM OK Indicates that the Camera Unit is reporting No fault
DIAG/CAM ERR Indicates that the Camera Unit is reporting Some fault
This display cycle repeats until the Display Mode Selector is pushed