Telecast CopperHead 3400, Руководство пользователя

Страница: 58 / 102

Telecast Fiber Systems – CopperHead 3400 Transceiver System User Guide – Preliminary Version
Page 56
A
Belden
Brand
Connectors into and out of the Copperhead 3400 Camera Unit Back Side
11
HD-SD/SDI Outputs #1 & #2
BNC Connector – Carries return video from the Base Station to the Camera Unit. Typically this will
feed a camera viewfinder or an HD viewing monitor at the camera location.
12
VBS In
BNC Connector – Carries SD Analog video from the Camera to the Camera Unit. This requires a short
BNC jumper cable between the Camera Unit and the Camera. Can be used to provide technical
monitoring from camera as with superimposed camera menus and other information.
13
VBS Out
BNC Connector – Carries SD Analog video from the Base Station the Camera Unit. Typically this will
feed an analog viewing monitor at the camera location.
14
Ethernet Out
RJ45 Connector – Carries IP Data. Typically connects to a Laptop computer or perhaps a wireless
access point at the camera location. Any IP traffic controlled equipment can be handled through this
signal path.
15
Power Wafer Connector
Multi-Pin Connector C – Supplies power to the Camera Unit from the Power Wafer (if so configured).
This cable is supplied with the Power Wafer Power Adaptor.
16
Fiber Connector
Swivel Mounted Fiber Optic Cable receptacle – specific connector depends on your configuration.
17
Intercom Headset Connector
Mini-phone Jack – Provides listen only Intercom audio.