Telecast CopperHead 3400, Руководство пользователя

Страница: 28 / 102

Telecast Fiber Systems – CopperHead 3400 Transceiver System User Guide – Preliminary Version
Page 26
A
Belden
Brand
4) Data Signal Path Monitors CCU and Data
CCU – Used for Camera Control Unit
Data 1 is used for a serial control device (RS232, 422, 485)
Data 2 is typically used for auxiliary devices such as Robotic Pan &
Tilt Head
Data 3 is used for a serial control device (RS232, 422, 485)
5) TC – Time Code Signal
Monitors Time Code to Base Station and return from Camera
6) Ethernet Signal
Monitors Ethernet to Base Station and return from Camera
7) GPI/Trigger Tally Signals 2
Monitors GPI/TRIG Signal to Base Station and return from
Camera and TALLY 2 Signal to Camera Unit
8) Tally 1 Indicator Light
Indicates the status of the GPI/Tally 1 signal
Off when the signal is not present
Bright Red when the signal is present
Area D - Optical Link Signal Strength Indicator & Power Switch
9) Optical Link Indicator
Indicates the status of the optical connection from base to
camera and camera to base
Green when both the Base Station and camera control unit
have optical power within normal range.
Red when either the Base Station or camera control unit optical
power is not within normal range
.
10) Rx Optical Display (Digital Status Display)
Four character display in one of five modes. See Page 74 for
use of this Digital Status Display
11) Base Rx/Dim Push Button
Change four character display mode. Push and release changes
display mode. Push and hold adjusts LED indicator brightness
12) Power Indicator LED
Green indicates power is applied to the camera control unit.
Blinking Green indicates a camera control unit error. Refer to
DIAG display mode for details – Page 74
13) Power On/Off Switch
Toggle switch to enable or disable camera power. When used
with the high voltage Base Station this enables or disables
camera power. When used with the low voltage Base Station
this turns camera power on and off