Telecast CopperHead 3400, Руководство пользователя

Страница: 67 / 102

Telecast Fiber Systems – CopperHead 3400 Transceiver System User Guide – Preliminary Version
Page 65
A
Belden
Brand
4. Prior to connecting the Fiber Connectors to the Base Station and Camera Unit inspect both
Connectors. If required, clean with dry compressed air or with technical wipes that have been
moistened with isopropyl alcohol. Fingerprints or other dirt on the optical connector end
surfaces will reduce the optical signal level on the fiber. If the connectors have been properly
capped during storage and movement you will not likely have a problem. However if a
connector has been dropped or dragged through dirt or exposed to dust cleaning is
recommended.
5. Once the Fiber Cable has been connected it is time to secure the Fiber Cable run. Make sure
there are no cable hazards in the run. Secure the cable with Cable Guards and/or Gaffers tape to
insure safety.
6. Now the system can be powered on. Plugging in Fiber Cable connectors with the power on will
not damage the system but is not recommended because of the chance of possible eye damage.
7. When re-spooling the Fiber Cable on to the spool guide it across the entire width of the spool so
that it winds evenly and the possibility of cinching or kinks is greatly reduced.