Telecast CopperHead 3400, Руководство пользователя

Страница: 42 / 102

Telecast Fiber Systems – CopperHead 3400 Transceiver System User Guide – Preliminary Version
Page 40
A
Belden
Brand
4.1. Mounting the Copperhead 3400 Camera Unit to the Camera
This example illustrates the mounting of a V-Mount battery system. Your system may differ. This case
illustrates a configuration where the camera is powered locally at the camera position by a battery. This
assumes a tactical fiber connection with no hybrid power on the cable
Figure 17 - Mounting the Copperhead 3400 Camera Unit to the Camera
1) Position your camera so that you can easily access the battery mounting plate at the rear of the
camera. Insure that the camera is well supported and stable. If a battery is mounted remove it
and put it to one side (camera model shown for illustrative purposes only – your camera may
differ)
2) Attach the CopperHead 3400 Camera Unit to the camera battery mounting plate. The mounting
is mechanically identical to attaching a battery. Instructions for attaching the required cables
between the camera and the 3400 Camera Unit can be found on Page 57.
3) If you are powering the camera and 3400 Camera Unit by battery, mount the battery to the
CopperHead 3400 Camera Unit battery mounting plate exactly as you would mount the battery
to your camera.
For configuration please see Chapter 5.