Field
Description
IP Address Mode
Select whether your device is to be assigned a static IP address
or whether it should be assigned this dynamically.
Possible values:
•
*"
(default value): You enter a static IP address.
•
-##
: Your device dynamically assigns an
IP address to the remote terminal.
•
-##
: Your device is dynamically assigned an
IP address.
Default Route
Only for IP Address Mode =
*"
and
-##
Select whether the route to this connection partner is to be
defined as the default route.
The function is enabled with
,
.
The function is disabled by default.
Create NAT Policy
Only for IP Address Mode =
*"
and
-##
When you configure an ISDN Internet connection, specify
whether Network Address Translation (NAT) is to be activated.
The function is enabled with
,
.
The function is disabled by default.
Local IP Address
Only if IP Address Mode =
*"
Assign the IP address from your LAN to the ISDN interface
which is to be used as your device's internal source address.
Route Entries
Only if IP Address Mode =
*"
Define other routing entries for this connection partner.
•
@ -##
: IP address of the destination host or
network.
•
'#7
: Netmask for Remote IP Address If no entry is
made, your device uses a default netmask.
•
%"
: The lower the value, the higher the priority of the
route (range of values
...
). The default value is
.
17 WAN
Teldat GmbH
290
bintec Rxxx2/RTxxx2
