13.4.6 Rogue Clients
Fig. 74:
Wireless LAN Controller
->
Monitoring
+
Rogue Clients
The Wireless LAN Controller->Monitoring+Rogue Clients menu displays the clients
which have attempted to gain unauthorised access to the network and which are therefore
on the blacklist. The blacklist is configured for each VSS in the Wireless LAN
Controller->Slave AP configuration->Wireless Networks (VSS) menu. You can also
add a new entry to the static blacklist.
Possible values for Rogue Clients
Status
Meaning
Rogue Client MAC Ad-
dress
Displays the MAC address of the client on the blacklist.
SSID
Displays the SSID involved.
Attacked Access Point Displays the AP concerned.
Signal dBm
Displays the signal strength of the client during the attempted
access.
Type of attack
This displays the type of potential attack, e. g. an incorrect au-
thentication.
First seen
Displays the time of the first registered attempted access.
Last seen
Displays the time of the last registered attempted access.
Static Blacklist
You can categorise a rogue client as untrustworthy by selecting
the checkbox in the Static Blacklist column. The block on the
client does not then end automatically, rather you need to lift it
manually.
Delete
You can delete entries with the
symbol.
13.4.6.1 New
Choose the Newbutton to configure additional blacklist entries.
Teldat GmbH
13 Wireless LAN Controller
bintec Rxxx2/RTxxx2
185
