Field
Value
•
-"" 3
(for PPP connections only): The RADIUS server
is used for recording statistical call data.
•
/ -3"
: The RADIUS server is used for
controlling access to the SNMP shell of your device.
•
*" -3"
: The RADIUS server is used for
sending configuration data for IPSec peers to your device.
•
8/-' <
: The RADIUS server is used for controlling
access to a wireless network.
•
C-0(?
: The RADIUS server is used for authenticating IPSec
peers via XAuth.
Vendor Mode
Only for Authentication Type =
-"" 3
In hotspot applications, select the mode define by the provider.
In standard applications, leave the value set to
.!3,
.
Possible values for hotspot applications:
•
9" (,"
: For France Telecom hotspot applications.
•
" ? *) *
: For Teldat hotspot applications.
Server IP Address
Enter the IP address of the RADIUS server.
RADIUS Secret
Enter the shared password used for communication between
the RADIUS server and your device.
Default User Password Some Radius servers require a user password for each RADI-
US request. Enter the password that your device sends as the
default user password in the prompt for the dialout routes on the
RADIUS server.
Priority
If a number of RADIUS server entries were created, the server
with the highest priority is used first. If this server does not an-
swer, the server with the next-highest priority is used.
Possible values from
(highest priority) to
+
(lowest priority).
The default value is
.
See also Policy in the Advanced Settings.
Entry active
Select whether the RADIUS server configured in this entry is to
Teldat GmbH
10 System Management
bintec Rxxx2/RTxxx2
99
