manualshive.com logo in svg

TelcoBridges TSBC Series, Инструкции по установке

Поделиться
Скачать
TelcoBridges TSBC Series Скачать руководство пользователя страница 26

TSBC Series System Installation Guide

20

3.3.3

TSBC-HW-SRV-MID: 1G

Prerequisites

To connect the TSBC-HW-SRV-MID to the data network using a 1Gb connection, you will need:

•

Gigabit layer 2 Ethernet switch. A second one is required to support redundancy of the VoIP 
interface.

•

CAT5 Ethernet cables with RJ45 male-male terminations for connection to the 1Gb ports.

Connections

The TSBC-HW-SRV-MID is connected to the data network by one or optionally two 1Gb Ethernet 
network links.

•

To connect the TSBC-HW-SRV-MID to the data network, refer to 

figure

 

3.5 on page

 20.

Figure

 

3.5

TSBC-HW-SRV-MID: Connecting to the Data Network 

3.3.4

TSBC-HW-SRV-MID: 10G

Prerequisites

To connect the TSBC-HW-SRV-MID to the data network using a 10Gb connection, you will need:

•

Gigabit layer 2 Ethernet switch. A second one is required to support redundancy of the VoIP 
interface.

•

CAT7 Ethernet cables with RJ45 male-male terminations for connection to the 1Gb ports.

Connections

The TSBC-HW-SRV-MID is connected to the data network by one or optionally two 1Gb Ethernet 
network links.

•

To connect the TSBC-HW-SRV-MID to the data network, refer to Figure

 

3.6 on page

 21.

TSBC-HW-SRV-MID

Data Ports

Содержание TSBC Series





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды