TelcoBridges TSBC Series, Инструкции по установке

Страница: 22 / 52

TSBC Series System Installation Guide
16
3.1 Connecting to the TSBC-HW-SRV Management Interface
The TSBC-HW-SRV management interface enables administrators to perform management tasks on a
TSBC-HW-SRV. To learn about the network capabilities of the TSBC-HW-SRV, refer to
https://docs.telcobridges.com/tbwiki/TSBC-SW:Networking .
Prerequisites
To communicate with the management interface, the following is needed:
• Two CAT5 Ethernet cable with RJ45 male-male terminations.
Note
Ethernet cables are not supplied with the TSBC-HW-SRV.
To communicate with the Management Interface:
1. Connect an RJ45 cable from the TSBC-HW-SRV to a Gigabit Ethernet switch.
2. Connect an RJ45 cable from the TSBC-HW-SRV to a second Gigabit Ethernet switch.
Figure 3.1 TSBC-HW-SRV System Management Interface
Management Interface
Gigabit Ethernet Switch 1
Management Interface
Gigabit Ethernet Switch 2
TSBC-HW-SRV-MID
TSBC-HW-SRV-HIGH
Management Interface
Gigabit Ethernet Switch 1
Management Interface
Gigabit Ethernet Switch 2