TelcoBridges TSBC Series, Инструкции по установке

Страница: 19 / 52

13
Installation Preparation
2.2.3 Installing the
TSBC-HW-SRV
on an Equipment Rack
The TSBC-HW-SRV and TSBC-HW-TRANS are mounted on a 19" equipment rack using the angle
brackets and screws provided in the box.
2.2.3.1 TSBC-HW-SRV
To install the TSBC-HW-SRV-HIGH or TSBC-HW-SRV-MID on the equipment rack, refer to either the
static or sliding rails installation Instructions in the following Dell documents:
• TSBC-HW-SRV-HIGH: Dell PowerEdge R630,
(
http://www.dell.com/support/home/us/en/19/product-support/product/poweredge-r630/manuals )
• TSBC-HW-SRV-MID: Dell PowerEdge R330, ( http://www.dell.com/support/home/us/en/04/product-
support/product/poweredge-r330/manuals )
2.2.3.2 TSBC-HW-TRANS
Mounting the TSBC-HW-TRANS
1. Using four metal screws, attach one angle bracket to the front, left-hand side of the TSBC-HW-
TRANS, when viewed from the front. Do the same for the angle bracket on the right-hand side.
2. Start mounting equipment beneath the TSBC-HW-SRV, keeping in mind the space required on the
equipment rack as described in
Section 2.2.2 “Vertical Placement of the Equipment” on page 12