Tektronix TLA 720, Руководство по обслуживанию

Страница: 66 / 214

Command Groups
TLA 720 Benchtop Chassis and TLA 7XM Expansion Chassis Service Manual
2–27
Table 2–8: Status commands (Cont.)
Header Description
:SEVent?
Returns summary information of all events in the
mainframe.
:S2EVent?
Returns the overflow summary information for events in
the mainframe.
System Commands
Commands in the SYSTem subsystem program utility functions provide version
information about the mainframe.
Table 2–9: System commands
Header Description
SYSTem
:COMMunicate
:SERial
:BAUD[?]
Sets or queries the baud rate of the RS-232 port.
:BITS[?]
Sets or queries the number of bits per character in the
RS-232 port.
:CONTrol
:RTS[?]
Sets or queries the operation of the RTS and CTS lines.
:ECHO[?]
Sets or queries whether incoming characters are echoed
back to the RS-232 port.
:ERESponse[?]
Sets or queries whether error messages are automatically
returned to the RS-232 port.
:LBUFfer[?]
Sets or queries the state of the character buffer.
:PACE[?]
Sets or queries whether software flow control (XON/XOFF)
is enabled.
:PARity[?]
Sets or queries the type of parity for the RS-232 port.
:PRESet
[:ALL]
Configures RS-232 port parameters to default values.
:RAW
Configures the RS-232 port parameters for use with a
computer.
:TERMinal
Configures the RS-232 port parameters for use with a
terminal.