manualshive.com logo in svg

Tektronix TDS 500C, Руководство по проверке работоспособности

Поделиться
Скачать
Tektronix TDS 500C Скачать руководство пользователя страница 124

Specifications

2–8

TDS 500C, TDS 600B & TDS 700C Performance Verification and Specifications 

The oscilloscope can also output copies of its display using the hardcopy feature.
This feature allows you to output waveforms and other on-screen information to
a variety of graphic printers and plotters from the TDS front panel, providing
hard copies without requiring you to put the TDS into a system-controller
environment.

You can make hardcopies in a variety of popular output formats, such as PCX,
TIFF, BMP, RLE, EPS, Interleaf, and EPS mono or color. You can also save
hardcopies in a disk file in any of the formats listed in the I/O section.

The hardcopies obtained are based on what is displayed on-screen at the time
hardcopy is invoked. The hardcopies can be stamped with date and time and
spooled to a queue for printing at a later time. You can output screen information
via GPIB, RS-232C, or Centronics interfaces.

Display

The TDS 500C, TDS 600B and TDS 700C Digitizing Oscilloscopes offer
flexible display options. You can customize the following attributes of your
display:

H

Color (TDS 644B, TDS 684B, and TDS 700C): Waveforms, readouts,
graticule, and variable persistence with color coding

H

Intensity: waveforms, readouts, and graticule

H

Style of waveform display(s): vectors or dots, intensified or nonintensified
samples, infinite persistence, and variable persistence

H

Interpolation method: Sin(x)/x or Linear

H

Display format: xy or yt with various graticule selections including NTSC
and PAL to be used with video trigger (option 05)

This oscilloscope also provides an easy way to focus in on those waveform
features you want to examine up close. By invoking zoom, you can magnify the
waveform using the vertical and horizontal controls to expand (or contract) and
position it for viewing.

Zoom

Содержание TDS 500C





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды