Tektronix RSA6100A Series, Руководство пользователя

Страница: 71 / 415

General Signal Viewing > DPX Spectrum DPX Spectrum Display
You can see whether a trace is enabled by looking at its Show check box. The "selected trace" is selected
in the Trace list. The Show check box is checked when the selected trace is enabled. To the right of the
show box are readouts for detection of the selected trace (+Pk, Avg (VRMS), ...) and its function (Hold,
Normal,...). You can enable/disable the selected trace by checking or unchecking
Show .
Selecting Traces for Display — Standard Instrument
To select a trace for display:
1. Use the Settings control panel:
Select Setup > Settings or click the Settings button.
Select the Traces tab.
Select the trace from the drop-down menu.
Select the Show check box.
2. Select a trace from the Trace drop-down list.
Specifying How +Peak, –Peak, and Average Traces Are Displayed
You control how the +Peak, –Peak and Average (Avg (VRMS)) traces are displayed from the Traces tab of
the Settings control panel. From the Traces tab, you can also specify whether these traces display results
from single updates or results collected over multiple updates.
RSA6100A Series Real-Time Spectrum Analyzers Help
59