Tektronix P6209, Инструкция по эксплуатации

Страница: 19 / 75

Product Description
6
P6209 4 GHz Probe Instruction Manual
KlipChip
Y-lead adapter
SMT KlipChip.
Use the SMT KlipChip test clips
to access fragile, dense circuitry.
KlipChip test clips can be connected to the Y-lead
or three-inch ground leads. Simply press the lead
socket into the KlipChip handle.
The KlipChip body freely turns, allowing better
probe orientation. To reduce stress and provide a
lower profile on components being tested, the
flexible sleeve of the KlipChip bends up to a
35 degree angle.
When selecting the grounding connection,
maintain as short a ground path as possible.
Refer to page 14 for more information.
SMA adapter jack.
Use the SMA adapter jack
with the SMT KlipChips to gain access to
calibration signals from SMA connectors on the
oscilloscope front panel.
Male SMA termination.
Protect the probe input
circuitry by connecting the termination to the
probe input connector when the probe is not in
use.