Tektronix P6209, Инструкция по эксплуатации

Страница: 16 / 75

Product Description
P6209 4 GHz Probe Instruction Manual
3
SureToe probe tip.
The SureToe tip is a pointed
probe tip useful for probing in dense circuitry.
Attach the SureToe adapters the same way as
the push-in probe tips.
Do not force the tip
. Also,
be careful not to injure yourself with the sharp
probe tip. They can be used with any of the
socketed accessory leads.
Push-in probe tip
Push-in probe tip. Use the push-in probe tip
for general purpose probing by hand. The tip may
also be used as a temporary test point. See
page 19 for more information.
The push-in probe tip may also be used with the
other socketed leads and adapters.
Installing the push-in probe tip.
Attach the
push-in probe tip by seating the tip into the probe
tip socket and pushing the tip in until it is seated.
Either end of the tip may be used.
Do not force the tip
. Also, be careful not to injure
yourself with the sharp probe-tip. To remove the
tip,
gently
grab the tip with small pliers and pull
the tip out.
Right
angle
adapter
Right-angle adapter. Use the right-angle
adapter for low-profile probing of 0.025 inch
square pins.
The right-angle adapter allows the probe to lie flat
against a circuit board. This enables probing in
vertical circuits, such as computer or communica-
tions backplanes, or in tight areas, such as
between circuit cards.
The right-angle adapter can be used directly with
the probe head or attached to the Y-lead adapter
or ground leads.
The right-angle adapter is attached the same way
as the push-in probe tip and can be easily
removed by hand.