System Subsystem
VX1410 IntelliFrame Instruction Manual
3–83
SYSTem:COMMunicate:SERial:LBUFfer
SYSTem:COMMunicate:SERial:LBUFfer?
Sets or queries whether the RS-232 line buffer is enabled. If the buffer is
enabled, all input characters are buffered until a newline character (^J or 0x0A) is
received. Then all characters are available for processing. You can use special
characters to modify the input before the newline character is received. For
example, for a backspace character, use ^H; for a line-delete character, use ^U.
If you enable the line buffer mode, the output character “\n” 0x0A will be
converted to “\n\r” 0x0A 0x0D and the input character will be converted to
“\n” 0x0A.
<Boolean>
Query Response
<NRf>
N
≠
0
0
ON
OFF
<NR1>
1
0
1
0
Not Applicable
None
None
Command:
Query:
Response:
All SYSTem:COMMunicate:SERial commands
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
