Tektronix HDVG1, Руководство по обслуживанию

Страница: 48 / 106

Operating Procedures
2- 24
HDVG1 HDTV Digital Video Generator Service Manual
You can generate three types of Trigger signals to the rear panel BNC. In the
Module Parameters window, shown on page 2--21, touch
Trigger
to enter the
Trigger window, shown below. Turn on the cursor by touching the On/Off on the
display. Touch
Reset All
if you want to set all the parameters to the default
settings (H Pos to zero and V Pos to 1).
NOTE . Triggers are active throughout the line. However, cursors are only active
during active video.
Trigger Output