Tektronix HDVG1, Руководство по обслуживанию

Страница: 31 / 106

Installation
HDVG1 HDTV Digital Video Generator Service Manual
2- 7
Installing Signals to the Default Destination.
1. Insert the test signal disk into the TG2000 Platform mainframe disk drive.
2.
Push the
DISK
button.
3. Touch Add Signals when the Disk menu appears.
4.
Touch
Select Source
.
5. Move the browse ring to the .DNL you want to load and push the Select key.
6. Select all of the signal sets at the module level and push the Select button.
7. Touch Quit/Load . The previous menu appears.
8. Touch Quit/Load again. The Add Signals window reappears, showing the
module as the selected destination.
NOTE
. The Add Signals window shows the amount of Kbytes selected (Total
Tagged) and the amount available on the module. If the tagged total is greater
than the amount available, the signal sets will not load.
9. Touch Start Load . The signal sets are automatically loaded into the module.
A pop-up menu tells you when the transfer is complete.
Installing Signals to a Non-default Destination.
1. Insert the test signal disk into the TG2000 Platform mainframe disk drive.
2. Push the DISK button.
3.
Touch
Add Signals
when the Disk menu appears.
4.
Touch
Select Source
.
5.
Move the browse ring to the .DNL you want to load and push the
Select
key.
6. Move the browse ring to a particular test signal and push the Select button.
7. Touch Quit/Load . The previous menu appears.
8. Touch Quit/Load again. The Add Signals window reappears.
NOTE
. The Add Signals window shows the amount of Kbytes selected (Total
Tagged) and the amount available on the module. If the tagged total is greater
than the amount available, the signal sets will not load.
9. Touch Select Destination .