Technology Solutions
Instruction Manual
Tek-Clamp 1200A-100H
www.tek-trol.com
17
M29
Input signal strength when the pipe flow is set to be empty.
For example: inputting 65 means when the signal strength is
lower than 65, the flow meter will think that there is no liquid in
the pipe and display the flow value as zero
Flow unit
setup
M30
Choose metric or imperial unit
M31
Choose instant flow rate unit
M32
Choose totalizer unit
M33
Choosing the totalizer multiplying factor which function is to
multiply totalizer data rang, normally set it as x1
M34
Net totalizer switch
M35
Positive totalizer switch
M36
Negative totalizer switch
M37
Restore parameters setup before leaving factory and reset
totalizer
M38
Manual totalizer (the key to control on/off)
M39
Choose operating language, including 8 kinds of different
languages for international users to use
M3•
Setup the LCD display method, inputting 0 or 1 means regular
displaying content inputting, 2-39 means automatically cycle
displaying method, displaying the previous menu of 2-39, time
interval is 8 seconds. When there is no input operation, it will
automatically enter cycle displaying status.
Choosing
Setup
M40
Damper coefficient
M41
Input low flow velocity cut-off value
M42
Setup static zero point
M43
Clear the zero-point value and restore the solidified zero-point
value.
M44
Set up zero-point deviant by hand
M45
Flow meter coefficient, rectification coefficient
M46
Input Network address identification number (IDN)
M47
Password protecting operation, after the flow meter is setup
with password, only browse menus without any modification.
M48
Input degree of linearity broken line rectification data.at most
there is 12 segments broken line, used for users to rectify
meter nonlinear.
M49
Network communication tester, on this window to visit the
data transferred from upper computer to judge the problems
arise during communication.
Scheduled
time output
M50
Optional setup of data output at scheduled time, choose
output content at scheduled time to print, more than 20 to
select
M51
Setup output time at scheduled time
M52
Printing data flow direction control.by default printing data will
