Technology Solutions
Instruction Manual
Tek-Clamp 1200A-100H
www.tek-trol.com
11
4
Electrical Installations
•
Please cut off power supply before connecting the device
•
Check the cable model before connecting the cable.
•
Follow the procedure for cable into lead collar: -
•
At first, loosen the gland nut on lead collar and take off blind, secondly, put gland nut and
rubber ring on cable, make the cable through lead collar; finally, straighten out cable,
screw gland nut tight to make rubber ring press cable.
•
When wire stripping, do not damage insulating layer which should be reserved.
Fig 11: Tek-Clamp 1200A-100H Converted Terminal and AC/DC Adaptor
Fig 10: TEK-Clamp 1200A-100H Electrical Connections Cables.
Fig 12: TEK-Clamp 1200A-100H Electrical Connections Cables interface.
