Technology Solutions
Instruction Manual
Tek-Clamp 1200A-100H
www.tek-trol.com
2
1
Safety Instructions
1.1
Intended Use
Tek-Clamp 1200A-100H is a Handheld Ultrasonic Flow Meter are used only for measure
the flow of liquids in closed pipes, e.g.: Clean water, wastewater etc.
The manufacturer is not liable for damage caused by improper or non-designated use.
1.2
Safety Instructions from the Manufacturer
This meter was calibrated at the factory before shipment. To ensure correct use of the
meter, please read this manual thoroughly.
1.2.1
Disclaimer
The manufacturer will not be held accountable for any damage that happens by using its
product, including, but not limited to direct, indirect, or incidental and consequential
damages. Any product purchased from the manufacturer is warranted in accordance with
the relevant product documentation and our Terms and Conditions of Sale.
The manufacturer has the right to modify the content of this document, including the
disclaimer, at any time for any reason without prior notice, and will not be answerable in
any way for the possible consequence of such changes.
1.2.2
Product Liability and Warranty
The operator shall bear authority for the suitability of the device for the specific
application. The manufacturer accepts no liability for the consequences of misuse by the
operator. Wrong installation or operation of the devices (systems) will cause the warranty
to be void. The respective Terms and Conditions of Sale, which forms the basis for the
sales contract shall also apply.
1.2.3
Information Concerning the Documentation
To prevent any injury to the operator or damage to the device it is essential to read the
information in this document and the applicable national standard safety instructions. This
operating manual contain all the information that is required in various stages, such as
product identification, incoming acceptance and storage, mounting, connection,
operation and commissioning, troubleshooting, maintenance, and disposal.
1.2.4
Safety Precautions
You must read these instructions carefully prior to installing and commissioning the
device. These instructions are an important part of the product and must be kept for future
reference. Only by observing these instructions, optimum protection of both personnel
and the environment, as well as safe and fault-free operation of the device can be ensured.
