Technology Solutions
Instruction Manual
Tek-Clamp 1200A-100H
www.tek-trol.com
15
4.
Linear material and its sound speed and thickness shows half sentence what any
linear.
5.
For non-standard liquids, the sound speed of the liquid is also needed.
6.
Generally, the Standard M1 clamp-on transducers is selected.
7.
Generally, Transducer mounting methods are the V-method or Z-method is the
common option.
8.
Check the space displayed on M25 and install transducer accordingly.
For standard pipe materials and standard liquids, the following detailed step-by-step
setup is recommended.
1.
Press keys
MENU
diameter, and then press 11
ENT
to enter M11 window to input the digits for
the pipe outer key.
2.
Press key
▼
/- to enter M12 window to input the
digits for the pipe outer diameter and then press
ENT
key.
3.
Press key
▼
/- (down) to enter M14 window,
and press mode. Use keys
▲
/+ (Up) and
▼
/-
(down) to scroll up and down to the intended
pipe material, and then press
ENT
.
4.
Press key
▼
/- (down) to enter M16 window,
press
ENT
key to enter the option selection
ENT
key to enter the option selection
mode, use keys
▲
/+ (Up) and
▼
/- (down) to scroll up and down to the liner
material, and then press key. Select “ No Liner”, if there is no liner.
5.
Press key
▼
/- (down) to enter M20 window, press
ENT
key to enter the option
selection mode, use keys
▲
/+ (Up) and
▼
/- (down) to scroll up and down to
the proper liquid, and then press
ENT
key
6.
Press key
▼
/- (down) to enter M23 window, press key to enter the option
selection mode,
ENT
use keys
▲
/+ (Up) and
▼
/- (down) to scroll up and down
to the proper transducer type, and then press
ENT
key.
7.
Press key
▼
/- (down) to enter M24 window, press use keys
▲
/+ (Up) and
▼
/-
(down) to scroll up and down to the proper transducer mounting method, and
then press
ENT
key
8.
Press key
▼
/- (down) to enter M24 window to install the transducers on the pipe,
and then press key to go to M01 for the results.
Fig 13: Keypad 1200A-100H
