teko Atra-814 Pro, Руководство по эксплуатации

Страница: 20 / 36

20
Examples of screens:
or
Upon cancellation of filtration in the menu item
«
4.Failures
» you may select the last
item
«
5.All
», which will activate a general list of failures, which may be browsed by
pressing
▼, ▲.
7.3.4
The present FW version is not restricted by authorizations for viewing the
event log.
The menu item «
5.Event log
» enables viewing events stored in CP memory using
filters:
«
1.Failures
» – critical failures.
«
2.Alarms
» – only «alarms» / «fires» / «violations» in the armed
partitions.
«
3.W/o arm/disarm
» – all the events in all categories except “arming” and
“disarming”.
«
4. By part. number
» – all the events in the selected partition.
«
5.All
» – all the events in the system without filters, including
information about activities of Engineer
When any of the filters is chosen, the keypad addresses CP with an inquiry according
to the type of the chosen filter and adds last
10 events selected using the filter to the
temporary storage buffer. Inquiry to CP is similar to described in 6.2.2.
When the filter «
1.Failures
» is selected, the information is displayed from the last in
time event (having the largest number in the current working cycle of CP from
10000).
Example of screen:
Here in the example:
«
Event 2181
» – event number (from 10000).
«
Failure
» – interpretation of event.
«
system
» – involved area.
IP 0004
BPS low voltage MC 0034
No connection
Event 2181 Failure
system