Teknor Industrial Computers PCI-934, Техническое справочное руководство

Страница: 36 / 124

Installing Storage Devices
7-3
7.3
C
OMPACT
F
LASH DISK
The board supports a IDE compatible flash disk by using the TEK-069 CompactFlash
daughterboard. CompactFlash (C-Flash) disks are the world’s smallest resident industry-
standard ATA/IDE subsystem for application, data, image, and audio storage. They have
the same functionality and capabilities as intelligent disk drives, but with the advantages of
being very compact, rugged (typical M.T.B.F. is 1,000,000 hours) and low power.
Available capacities are up to 24MB. 40 and 80MB modules will be supported when
available.
The C-Flash disk connects on the PCI-934 via the onboard Flash Disk Connector J19 (J19
connector pinout is provided in Appendix-C).
7.3.1 INSTALLING COMPACTFLASH MODULE
Follow this procedure to install a C-Flash module on the TEK-069 and to install the TEK-
069 on the board:
1. Slide the C-Flash module into its receptacle and press gently to ensure a good insertion
and connection.
Com pa ct F la sh
Dau gh terb oard
Co m pac t Flash
M odu le
Spac er
2. Clip the spacers into their mounting holes: two are located close to the interface
connector, a third one is located at the bottom of the module. The spacer located near
the C-Flash module acts as a retention mechanism and prevents it from accidently
sliding.