The XT1 is shown here. Your actual model may vary.
11
STEP 6
Attach Angle Tether & Head Pillow
Attach Angle Tether
• The tether will come pre-assembled to the A-Frame.
• Unfold the adjustable tether and clip it to the U-Bar on the
underside of the Table Bed (Figure 19).
• Slide the buckle to lengthen or shorten the strap depending on
your desired maximum angle of inversion.
Attach Head Pillow
Attach the Head Pillow by securing the Velcro Straps through the
specified holes in the Table Bed (Figure 20), which allow the pillow
to shift with the user when in use. You may also customize the
position depending on your preference.
LENGTHEN
SHORTEN
FIGURE 19
FIGURE 20