Tecnoinox PF105G7, Инструкция по установке и использованию

Страница: 15 / 51

GB / IE - 4 5410.265.04
Part 3
Use
Putting the range into service
IMPORTANT:
The first time the oven is switched on you will notice a bad smell due to
production residues such as grease, oil and resin.
When using the oven for the first time you should switch it on at the
highest temperature for at least 1 hour, making sure that it is empty. After
this time has elapsed, the oven is ready for use.
RECOMMENDATIONS FOR USE:
For best results, it is a good rule never to put food in a cold oven. It is
best to wait for the oven to reach the chosen temperature first.
Never line the oven walls with aluminium sheets, especially the bottom
part of the cooking chamber.
Clean the oven after every time you use it.
Turning the burners on and off
COOKTOP BURNERS
Press and turn the knob (fig.3)“ from position “ ” to “ ” keeping it
pressed in.
With igniter “W” (fig.8) or a match, light the flame.
After the flame has lit, hold the knob down for roughly 10 seconds (count
to 20); so the thermocouple heats up and keeps the safety valve open.
HOT PLATE
In the models with a hot plate, lift cover "C" (fig.8) and follow the previous
instructions.
For model PPF70G7 light the pilot by pressing igniter button “ ”
repeatedly (fig.2).
NOTES: if the piezoelectric device cannot be used, you can light the
flame by hand using a match or a gas lighter.
To light the main burner, turn the knob to the desired position, following
the values in the table below:
Off Pilot light on Burner MAX Burner min
TURNING THE BURNER OFF:
Turn the knob from the position it is in to the “ ” position.
TURNING THE APPLIANCE OFF
Turn the knob to the “ ” position.
Turning the electric oven on and off (models G7 only)
TURNING THE OVEN ON:
The heating elements are controlled by a 4-position selector switch,
while the temperature inside the chamber is controlled by a
thermostat (60-300°C).
The selector lets you choose the most suitable type of heating using
the appropriate heating elements.
Turn the knob (fig.6) of the heating elements' selector to one of the
on positions . The green indicator light “E” (fig.1.1) will come on to
indicate that the oven is connected to the mains.
Turn the knob (fig.5) of the thermostat until you reach the desired
cooking temperature.
The orange luminous indicator “F” (fig.1.1) lights indicating that the
heating elements are on.
N.B.:
All the cooking must be done with the oven door closed.
Positions of knob C
0 Off
Top and bottom heating elements
Top heating element “Grill”
Bottom heating element
Positions of knob D
°C 0 60 120 150 180 210 240 270 300
TURNING THE ELECTRIC OVEN OFF:
Turn the knobs (fig.5 and 6) to 0.
Turn the switch installed upstream of the appliance off.
Safety thermostat (G7 models only)
In the case of overheating, due to incorrect use or due to a faulty
component, safety thermostat “G” (fig. 1.1) is activated. This
automatically cuts off the power to the heating elements. When this
device is activated turn the oven off, turn the electrical power to the
appliance off, close the gas tap installed upstream of the appliance and
inform the after-sales service.