Tecnoalarm TP8-96, Руководство по установке, Страница: 79 / 118

TP8-96 VIDEO - Installer Manual Access configuration
5-3
z
Disabling direct arming/disarming
If the function is enabled, the user will
not be entitled to arm all the associated programs directly by pressing the
hash key (#YES), but will have to arm them one after the other.
If the item is checked, the direct arming/disarming is disabled.
z
Privileged
If the function is enabled, the user code, beside the standard functions such as arming/disarming and by-pass
program, is enabled for viewing of the general alarm log and the event log of the associated programs. In addition, the
code will have access to part of the programming menu (telephone and exclusion).
z
Zone exclusion disabled
Disabling of the code for the exclusion of the zones.
If the function is enabled, the user will
not be entitled to arm the control panel excluding some of the zones (both
voluntary and automatic zone exclusion are disabled).
The control panel will be armed in any case, and if there are open zones, the alarm will be released.
If the item is checked, the exclusion of zones is disabled.
z
Disabling access to remote controls
If the function is enabled, the code will
not be entitled to activate or deactivate the remote controls from a distance
by remote control.
If the item is checked, the access by remote control is disabled.
Repeat the procedure for all the user codes (1 to 200).
See § 5.4 for explanatory notes.
Press:
z
OK to confirm and quit
z
Abandon to quit without saving