Tecnoalarm TP8-96, Руководство по установке, Страница: 69 / 118

TP8-96 VIDEO - Installer Manual Time parameter configuration
4-3
4.2 TIMERS
Select the Timer table.
On the screen is viewed:
The timer configuration table permits:
z
Programming of the 16 timers
z
Programmation of the test call
z
Programmation of the test call server
PROGRAMMING OF THE TIMERS
The following parameters can be set for every timer:
Each timer is represented by a series of items which permit
programming of the following parameters:
z
Frequency of activation
z
Hour of activation
z
Associated function
z
Associated programs (1 to 8) or remote controls (1 to 8)
Use the scroll bar to view all the timers.
Frequency of activation
Select the frequency from the drop-down menu: not active, every day,
every working day, every holiday eve, every holiday, every sunday, ...,
every saturday.
Hour of activation
Enter the hour of activation in the items hh and mm.
Associated function
Select the function from the drop-down menu.
If the timer is associated to the programs, the available functions are
arming, disarming, by-pass, end of by-pass, remote activation, remote
deactivation, arming subject to check-up (avoids arming in case of
alarm due to low battery, power failure, tamper, supervision, fault,
antimasking), enforced arming, enforced arming subject to check-up.
However, if it is associated to the remote controls, the available
functions are: remote activation and remote deactivation.
All the other functions concern the programs.