Tecnoalarm TP8-96, Руководство по установке, Страница: 57 / 118

TP8-96 VIDEO - Installer Manual Telephone section configuration
3-13
3.1.7 REMOTE CONTROLS
Select the Remote control table. On the screen is viewed:
ALPHANUMERIC DESCRIPTION
The control panel can manage max. 8 remote controls.
It is possible to associate an individual description to each remote control that will replace the zone number and identify
the program in every process. The remote control description will be viewed on the display and announced by the
speaker of the console.
A The voice message can be composed of max. 4 words selectable among those included in the vocabulary.
4 items are viewed, one for each word.
Click on the arrow of each item to scroll the vocabulary and select the word.
B At the end, click on the validation arrow key B to memorize and play the message.
The words are copied into the description line. It is possible to program the description manually
writing directly it in the description line.
Remember that the display of the console views descriptions of maximum 16 characters. All further
characters will be cut off.
ACTIVATION TIME
Permits programming of the activation time (in minutes and seconds) of each remote control.
From 0 to 59 minutes and 59 seconds.
z
Pulse functioning Functioning is intermittent if an activation time has been programmed. On reception of the
commutation command, the remote control is activated whereas on expiry of the programmed
activation time the remote control automatically returns to stand-by.
•
Command = < commutation > < activation time > < stand-by>
z
Toggle functioning Functioning is static if no activation time has been programmed, i.e. each time a commutation
command is sent, the remote control changes status.
•
Command = < commutation >
• Command = < stand-by >
Repeat the operations for every remote control to be configured (max. 8), then press:
z
OK to confirm and quit
z
Abandon to quit without saving
A
B