Tecnoalarm TP8-96, Руководство по установке, Страница: 106 / 118

Special procedures Installer Manual - TP8-96 VIDEO
A-6
SEND (RESTORE)
Click on the Send (Restore) button to send the wireless
configuration to the control panel.
Warning: The operation is irreversible. All the data
relating to the wireless devices currently saved on the
control panel will be overwritten.
On the screen is viewed the beside image.
Commands available
z
Yes to confirm and proceed with the upload of the
configuration of the wireless section
z
No to abandon the upload of the configuration of
the wireless section
If the procedure has been completed successfully, on the
screen is viewed
Transmission completed correctly .
Press OK to quit the restore menu.
RECEIVE (BACKUP)
By pressing the Receive button, the wireless configuration
is dwnloaded in the PC.
If the procedure has been completed successfully, on the
screen is viewed
Reception completed correctly .
Press OK to quit the backup menu.
The date and the time of the last backup are updated once
the process has been completed.
SERIAL NUMBER OF THE CONTROL PANELl
All the Tecnoalarm control panels are identified by their
own 10 digits serial number.
The serial number is assigned by the manufacturer and it is
written on the memory of the control panel and on a label
on the CPU board.
During the backup process, the serial number is checked
and valid by the software.
If it is different from the one stored during the last backup,
the software sends a message of incoherence and
requests confirmation before continue.
Commands available
z
Yes to confirm the operation
z
No to abandon the operation