TechVision NS64P8N8, Руководство пользователя

Страница: 10 / 145

Introduction NVR User Manual
4

The NVR can be controlled and operated by the buttons on the front panel, the remote
controller and the mouse

Setting interfaces can be switched to one another conveniently by clicking the main menus
on the top of the setting interfaces

Support NVR information viewing including basic, camera status, alarm status, record
status, network status, disk and backup status

Support factory restoring, import and export of the system configuration, log view and
export and local upgrading by USB mobile device

Support auto recognition of the displayer’s resolution

You can click the right mouse button at any interface to go back to the upper interface

You can click the middle mouse button at any interface to go to the live view interface

The display language and video format of the NVR will not be changed and the system
logs will be reserved if you reset the NVR to factory default

Press and hold the right mouse button for 5 seconds in any interface to switch the output to
VGA and the NVR will display the video at the lowest resolution which the NVR supports
1.3 Front Panel Descriptions
The following descriptions are for reference only.
Type I:
Name Descriptions
REC When recording, the light is blue
Net When access to network , the light is blue
Power Power indicator, when connection , the light is blue
Fn No function temporarily
Type II:
Name Descriptions
Power Power Indicator, when connected, the light is blue
HDD The light turns blue when reading/writing HDD
Net The light turns blue when it is able to access the network
Backup The light turns blue when backing up files and data
Play The light turns blue when playing video
REC Power Indicator, when connected, the light is blue
AUDIO /+ 1. Adjust audio 2. Increase the value in setup
P.T.Z / - 1. Enter PTZ mode 2. Decrease the value in setup
MENU Enter Menu in live
INFO Check the information of the device
BACKUP Enter backup mode in live
SEARCH Enter search mode in live
Exit Exit the current interface