34
Upon selecting the calibration option, display will show the parameters given in TABLE , to increment/decrement
values use START/STOP key, long press to the START/STOP increment/decrement values rapidly. Press the ENTER
key to save current value & go to next parameter. To return on GENERAL SETTINGS screen at any moment press
the BACK key. For returning to the RUN mode from the GENERAL SETTINGS screen press the BACK key.
Parameter
Description
Set Values
R-Ph Vin
R phase input voltage calibration
Enter
Multimeter
display values
Y-Ph Vin
Y phase input voltage calibration
B-Ph Vin
B phase input voltage calibration
R-Ph Vout
R phase output voltage calibration
Y-Ph Vout
Y phase output voltage calibration
B-Ph Vout
B phase output voltage calibration
Table no.6 Available Parameters in User Level
