31
7.7 Advance options
:
The card has two modes of setting i.e. GENERAL SETTINGS:
7.7.1 General settings:-
To enter GENERAL SETTINGS long press the ENTER key, user interface will ask for a 4-digit password. Each
digit must be set using START/STOP keys and confirmed using ENTER key. Only upon entering a right
password can the settings be accessed. This is to prevent the parameters from unintentional or
unauthorized alteration. A wrong password will result in access restriction.
AFTER ENTERING the right password, the display will now show the GENERAL SETTINGS screen which has
three options; respectively Error LOG (LOG), Parameter settings (SET), Calibration (CAL). Press the
START/STOP key to navigate between the options & press the ENTER key to select the desired option.
7.7.2 Error log:
If LOG option is selected, error records are shown as latest error first, Use START/STOP key to scroll
through the error log entry. The last entry shown will be blank to indicate end of errors.
7.7.3 Parameter settings:
If SET option is selected, display will show the parameters given in TABLE 5, to increment/decrement
values use START/STOP key, long press the START/STOP to increment/decrement values rapidly. Press the