C
Copyright Technolog Ltd. 2017. All rights reserved.
Information contained in this document subject to
change without prior notice.
Sheet 37 of 41
Technolog Limited,
Ravenstor Road,
Wirksworth,
DE4 4FY,
United Kingdom
T: +44 (0) 1629 823611
E: [email protected]
www.technolog.com
DMR No.: 7311
2137PM9001 Rev. A
Installation: Wall mounting
110 mm mounting hole centres
7
0
m
m
m
in
im
u
m
(
N
o
te
2
)
Notes
1) Where the Cello 6S does not feature an external antenna connector, i.e. it only has an internal antenna, then it
should be positioned as high up as possible and, where practical, away from metal structures. In order to determine
optimal Cello 6S performance a signal strength test should be perfomed (as detailed in the "Installation:
Commissioning - Cello 6 Wizard: Signal strength" section of this manual) with the Cello 6S being moved around until
the strongest signal strength is obtained although be aware that it may not be physically possible to locate it in the
perfect location.
2) Although a minimum dimension is provided for the distance of the mounting holes from any overhanging
obstruction(s), where it is required that the enclosure lid is removable with the Cello 6S remaining in place, for
example to allow for battery or SIM card replacement, then this minimum dimension will need to increase to at least
170mm.
3) Refer also to the "Considerations: Installation" and "Considerations: Environment" sections of this document.
RF exposure considerations.
For further details please refer to the Technolog Declaration of Conformity ('D of C') document 2137DC9001 associated
with Cello 6S.
Drill two holes in the
positions indicated to
take 'Rawl' plugs,or
similar, suitable for
M5 x 25mm, or
equivalent, screws.
7
0
m
m
m
in
im
u
m
